| |
CNC Series : Silicon Powder EDM P60 / P90 |
|
Using both powder and dishcarge fluid for CNC mirror surface finishing.
The X, Y& Z axis utilizes AC servo motor.
Multi cavities machinng, ORBIT-CUT machining & Helix machining.
A.T.C. (Automatic Tool change) & C-axis machining available.
The Circle Angle of Sparking is lower than 0.02mm.
The best surface roughness (Ra) is better than 0.1 µm.
High speed and long distance jumping
Multi-side ORBIT-CUT machining for X, Y & Z axis
Widespread application on plastic mold, rubber mold, die-casting mold, 3C products
Power machining enables high stability & efficiency 30% more than general electric discharge machining.
The work tanks of discharge fluid and powder are separated individually. |
|
|
|
| X, Y-Travel |
400 x 300 mm |
500 x 400 mm |
| Z-Travel |
300 mm |
300 (290) mm |
| Table Dimension |
600 x 320 mm |
760 x 440 mm |
| Work Tank Dimension |
800 x 540 x 280 mm |
1050 x 660 x 360 mm |
| Max. Table-Quill Distance |
500 mm |
680 mm |
| Max. Electrode Weight |
40 kgs |
60 kgs |
| Max. Table Loading |
800 kgs |
1200 kgs |
| Dielectric Tank Capacity |
200 + 200 Litre |
400 Litre |
| Filters |
2 PCS |
3 PCS |
| Machine Weight |
2100 kgs |
2550 + 520 kgs |
| Machine Height |
2240 mm |
2450 ~ 2740 mm |
| Ground Area |
 |
 |
| Nominal Current |
30A / 5A, 45A / 5A, 60A / 5A |
| Input Voltage |
220 / 380 / 415 / 440V |
| Connected Rating |
4KVA / 5.5KVA / 7KVA |
| Max. Stock Removal Rate |
200 / 300 / 400 mm³ / min |
| Best Surface Roughness |
Ra ≦0.1μm |
| Best Electrode Wear Rate |
< 0.2% ( specific equip.< 0.1%) |
Standard accessories |
Additional Equipment |
| Precision Electrode Clamps |
ATC (Auto Tool Change) |
| Piezoelectric Light |
C-Axis |
| Magnetic Induction Oil Nozzle Base |
"EROWA" Chuck-Swiss |
| Operation Manuals |
3R System Chuck-Sweden |
| M.F.D (Fine mirror Finish) |
Automatic Fire Extinguisher |
| Di-electric Cooler |
Charge Coupled Device (CCD) |
| Permanent Magnetic Chuck |
|
| Silicon Powder x 2 kg |
|
| X, Y, Z Axis Linear Scales (1μm) |
|
| ․ Networking monitoring CNC machine (option) |
|
.png){kind=small}
